So I’ve spent a couple of hours watching videos, playing with Ryzen Master and clocking performance through cinebench and UserBenchMark.
I used cinebench on the 10minute test throttling option.
After trying to do 4400 MHz, at 1.55 volts, it worked for userbenchmark but not cinebench.
This is the best UserBenchMark I could get: [https://www.userbenchmark.com/UserRun/63145744](https://www.userbenchmark.com/UserRun/63145744)
Cinebench went halfway but was averaging at 99C before crash.
​
Doing 4300 MHZ at 1.55 volts did work on both which gave the results as:
UserBenchMark: [https://www.userbenchmark.com/UserRun/63146830](https://www.userbenchmark.com/UserRun/63146830)
Cinebench average 87C:
Multi Core: 9421pts
Single Core 1075pts
MP Ratio 8.77pts
​
My only issue is that on both, my radiator is still cold, it does not warm up at all.
This only concerns me because, if it wasn’t working, then the CPU would overheat which it does not, but the radiator is cold. So I’m guessing its the actual transfer from the CPU to the CPU Cooler which is causing this issue, so I’m thinking about liquid metal possibly instead of my Arctic MX-6 thermal paste.
​
Any thoughts on my first overclock?
​